This converter is equipped with
a built-in TTL PCB that connects a Canon digital SLR with
SEA&SEA Series-YS strobes and uses the camera's E-TTL
or E-TTLII flash adjustment to control the amount of light
put out by the strobe. The converter allows quick switching
underwater between TTL mode and manual mode from outside
the camera. You can use the TTL correction dial after
checking the results of a shot in the LCD monitor to adjust
the amount of strobe light for the next shot. Because
the converter comes with two separate strobe connectors,
you can use advanced automatic TTL flash adjustment with
two strobes.
Product
code
50106 TTL Converter
for Canon
Main
Features of TTL Converter
*
Switching to
manual on the converter means activating the manual
function on the connected YS strobe (depending on
the strobe model).
*
To use E-TTL
or E-TTLII flash adjustment with two strobes, both
strobes must be the same model.
*
If the TTL converter
battery runs out of power, the connected YS strobes
do not fire.
*
Requires the
5-pin Sync Cord/N 17100 to connect a strobe.