This converter is equipped with
a built-in TTL PCB that connects a Nikon digital SLR with
SEA&SEA Series-YS strobes and uses the camera's i-TTL
flash adjustment to control the amount of light put out
by the strobe. The converter allows quick switching underwater
between TTL mode and manual mode from outside the camera.
You can use the TTL correction dial after checking the
results of a shot in the LCD monitor to adjust the amount
of strobe light for the next shot. Because the converter
comes with two separate strobe connectors, you can use
advanced automatic TTL flash adjustment with two strobes.
Product
code
50104 TTL Converter
for Nikon
Main
Features of TTL Converter
Switching to
manual on the converter means activating the manual
function on the connected YS strobe (depending on
the strobe model).
*
To use i-TTL
flash adjustment with two strobes, both strobes
must be the same model.
*
If the TTL converter
battery runs out of power, the connected YS strobes
do not fire.
*
Requires the
5-pin Sync Cord/N 17100 to connect a strobe.