 |
|
|
|
|
|
|
|
|
|
This converter is equipped with
a built-in TTL PCB that connects a Nikon digital SLR with
SEA&SEA Series-YS strobes and uses the camera's i-TTL
flash adjustment to control the amount of light put out
by the strobe. The converter allows quick switching underwater
between TTL mode and manual mode from outside the camera.
You can use the TTL correction dial after checking the
results of a shot in the LCD monitor to adjust the amount
of strobe light for the next shot. Because the converter
comes with two separate strobe connectors, you can use
advanced automatic TTL flash adjustment with two strobes.
|
| Product
code |
50104 TTL Converter
for Nikon |
| Main
Features of TTL Converter |
| Switching to
manual on the converter means activating the manual
function on the connected YS strobe (depending on
the strobe model). |
|
*
|
To use i-TTL
flash adjustment with two strobes, both strobes
must be the same model. |
|
*
|
If the TTL converter
battery runs out of power, the connected YS strobes
do not fire. |
|
*
|
Requires the
5-pin Sync Cord/N 17100 to connect a strobe. |
|
| Compatible
Housings |
DX-D200, *DX-D50,
*DX-D70 (* needs connector modification) |
| Compatible
strobes |
YS-90Auto,
YS-90Duo, YS-90DX, YS-110, YS-120, |
|
|
|
|
|
|
|
地址: 尖沙咀漢口道19-21號漢宜大廈1樓D室
Room D, 1st Floor, Hanyee Building, 19-21 Hankow Road, Tsim Sha Tsui, Kowloon, Hong Kong
Diving Express : (852) 2724 1322 ask@divingexpress.com Wanderlust vacations : (852) 2868 2268 denny@wanderlust.com.hk
Copyright 2005 (C) All Rights Reserved.
|
|
